The high-definition video source transmits HD video signal through the network cable up to 60m;
Compliance with the HDMI2.0 standard protocol, HD video signal resolution max up to 3840*2160@60Hz;
Compliant with HDCP2.2 standard - high-bandwidth digital content protection technology；
Supports USB KVM function that can long-distance use keyboard or mouse controlled;
Supports EDID copy function，that can match many kinds of display devices;
Supports POC unilateral power supply;
Ability to automatically identify and configure various display modes;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Built-in ESD protection circuit, comprehensive protection system safety;
Simple and easy to install, plug and play, no need to set up further;
Package List
HDMI Transmitter 1pcs
HDMI Receiver 1pcs
USB-A To USB-B cable 1pcs
Power adapter 1pcs
User Manual 1pcs
Warranty Card 1pcs
Specifications
Parameter | Description | |
Video | Standards | HDMI 2.0; HDCP 2.2 |
Maximum Pixel Clock | 600MHz | |
Maximum data rate | 18Gbps | |
Resolution | 3840*2160@60Hz | |
Impedance | 100Ω | |
KVM | Interface Type | Tx: USB-B interface Rx: USB-A interface |
Ethernet | Interface | RJ45 |
Max Transmission Distance | Cat6 :60m | |
Other | Power Supply | DC 12V |
Power Dissipation | MAX 5.16W | |
Temperature | Operating：-5℃ ~ +70℃ | |
Humidity | Operating：5% ~ 90% | |
Size | 94*70*26mm | |
Warranty | 1 year | |
Interface specification
Transmitter Receiver
Port description
Port Name | Function |
HD IN/HD OUT | HDMI signal input/output interface |
UTP | Ethernet interface |
USB | PC USB signal input interface |
K/M | USB keyboard and mouse input interface |
DC 12V | Power adapter input interface |
EDID | EDID copy button. Short pressed: Completed copy EDID when“STA”indicator light flashing; Long pressed for 5 seconds: Completed restore the default EDID when“STA”indicator light flashing; |
STA | Video signal input status indicator. Bright: no video signal input detected; Flashing: Detected video signal input; |
PWR | System power indicator |
Diagram
Installation steps
1. Using 1 HDMI cable to connect the transmitter“HD IN”and HDMI signal source;
2. Using 1 HDMI cable to connect the receiver“HD OUT”and HDMI signal display;
3. Using 1 “USB-A To USB-B ”cable to connect the transmitter “USB”and PC USB interface;
4. Connected the keyboard and mouser to the receiver “K/M”interface;
5. Using Cat6 network cable to connect the transmitter and receiver “UTP”interface;
6. Plug into the "DC 12V" power interface with a power adapter, the transmitter and the receiver will power on. When the“PWR”indicator lights up and “STA”indicator flashing, the system will run normally.
Warranty
Thank you for using this product. In order to protect your rights, please read the following protection terms carefully:
We provide 1 year warranty and lifetime maintenance after-sales service for this product. During the one-year warranty period from the time of purchase, the company will provide customers with free maintenance services due to hardware failures caused by the quality of the product itself.
Please keep the user manual in a place where safety and easy to find so that you can read it immediately when needed.
Safety instruction:
l Please do not disassemble this product by yourself because it doesn't including DIY function.
l Please keep the product away from water in case damaged, because it is not waterproof design.
l Please use dry cloth when clean the product surface.
l Please do not use this product in environments that are too humid or too hot.
l Please avoid contact with corrosive substances.
l When there is damage or other physical damage to the product, please stop using and contact customer service to get support.
$24-35
MODEL:HT240HK
Quick View
