Transmits HDMI video signals up to 1-20km over a pair fiber optic cable;
Support video resolution up to 3840*2160@60Hz signal;
Supports screen formats YUV444 and RGB444;
Compliance with HDMI 2.0 and HDCP 2.2 standard;
Supports RS232 two-way transmission;
Support USB keyboard and mouse;
Support for embedded audio input and output;
Supports bidirectional transmission of infrared signals;
High compatibility, can auto-match source and display device;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Simple to install, plug and play
Package list
HDMI transmitter .........................1pcs
HDMI receiver ..............................1pcs
USB-A to USB-B Cable...................1pcs
IR transmitter/receiver Cable.......1pcs
Power adapter ……………….…………2 pcs
User manual ………………….…………1 pcs
Specifications
Parameter | Description | |
Video | Standards | HDMI 2.0; HDCP 2.2 |
Maximum pixel clock | 340MHz | |
Maximum data rate | 18Gbps | |
Maximum resolution | 3840*2160@60Hz | |
Connector | HDMI-A | |
Impedance | 100Ω | |
Optical fiber | Interface | SFP model – LC connector |
Fiber type | Single-mode | |
Wavelength | T-1310nm R-1550nm | |
Interface bandwidth | 2.5Gbps | |
IR | Interface | 3.5mm earphone seat |
IR frequency | 28Khz-61Khz | |
RS232 | Interface | Industrial Terminal |
Signal Direction | duplexing | |
Baud Rate | Self-adaptive Max: 115200bps | |
Data Bits | 8 | |
Other | Power supply | The power adapter: DC 12V |
Power dissipation | MAX 13W | |
Temperature | Operating: -5℃ ~ +70℃ | |
Humidity | Operating: 5% ~ 90% | |
Dimension | 123*82*23mm | |
The warranty | 1 year free warranty | |
Panel
Port name | Description |
IR IN/OUT | IR Input/Output |
HD IN/HD OUT | HDMI Input/Output |
UTP | RJ45 cable port |
USB | USB Host is connected to your console or laptop |
K/M | Keyboard/mouse |
T/G/R | RS232 interface with TXD/GND/RXD at the terminal |
DC12V | The power input |
LED indicator | Description |
FIBER | Detect the SFP fiber module |
LINK | Normal state often off, flashing once: NO Link; flashing three times: forward video normal, reverse data abnormal; flashing four times: forward video abnormal, reverse data normal |
STA | The light is always on when it is in normal condition |
PWR | Power lamp。 |
Installation
1、 The HDMI signal source (such as set-top boxes, Blu ray DVD, computers, etc.) access to the HDMI transmitter ;
2、 Connect the receiver of the HDMI extender to the display device (such as a high definition TV, a tiled screen, etc.);
3、 The LC interface optical fiber line connects the Transmitter and the Receiver SFP optical fiber interface module;
4、 Will be the transmitter or the receiver connected to a power source, when the indicator lights up normally, normal operation of system.
Warranty
Please keep the user manual in a place where safety and easy to find so that you can read it immediately when meet problems.
safety instruction:
Please do not disassemble this product by yourself because it doesn't including DIY function.
Please don't make the product touch water in case damaged, because it is Not waterproof design.
Please use dry cloth material when clean the product surface.
Please do not use this product in the environment of too wet or too high temperature.
Please avoid contact with corrosive substances.
When there is damage or other physical damage to the product, please stop using and contact with customer service to get support.
